Fastest lead times in Virginia  •  UL 891 / UL 1558 assemblies  •  Free delivery planning in 3–5 days Call (951) 403-5738
Home / Resources / What to Do When a Main Breaker Will Not Close
Blog

What to Do When a Main Breaker Will Not Close

Trip unit, shunt trip, undervoltage release and mechanical interlock are the first four things to check.

What to Do When a Main Breaker Will Not Close

The short answer

Trip unit, shunt trip, undervoltage release and mechanical interlock are the first four things to check. In practice, the answer usually comes down to three numbers: the amperage your service carries, the voltage class your utility delivers, and the fault current available at that point. Once those are fixed, the equipment selection follows.

Why it matters

Switchgear is not a commodity box. The bus bracing, breaker frame and enclosure rating are chosen for a specific fault level and a specific room. When any one of those assumptions changes — a larger transformer, a added feeder, a different utility configuration — the equipment has to be re-checked, not just re-priced.

That is also why two quotes for the "same" 2000A lineup can differ by tens of thousands of dollars. One is braced at 65kA with insulated case breakers. The other is braced at 100kA with low-voltage power breakers, drawout compartments and a full relay package.

How to apply it on your project

  • Start from the utility letter: service voltage, amperage and available fault current.
  • Confirm whether the system is grounded wye or delta — it changes the pole count and the neutral.
  • Decide indoor or outdoor, because the enclosure rating drives the layout.
  • Check the room: section width, door swing, cable entry and working clearance.
  • Get the approval drawing reviewed by the installing electrician before fabrication.

Common mistakes

The three we see most often: quoting from an old single-line that no longer matches the service, forgetting utility metering in the section count, and assuming a standard lead time during a busy construction cycle. Each one costs a week or more if it surfaces after the drawings are approved.

Need a number for your project? Send the single-line to saleselectricalbuyers@gmail.com or call (951) 403-5738. We reply with pricing, lead time and a drawing schedule.

Related reading

Request a quote

Request a switchgear quote

Send your single-line or tell us the service size. We reply with pricing, lead time and a drawing schedule.

Call: (951) 403-5738
Email: saleselectricalbuyers@gmail.com

Or call (951) 403-5738

Switchgear manufacturing and supply across Virginia

Custom switchgear builder in Virginia  •  Electrical switchgear manufacturer in Virginia  •  600V switchgear in Virginia  •  1000V switchgear in Virginia  •  4160V switchgear in Virginia  •  Medium voltage switchgear in Virginia  •  15kV class switchgear in Virginia  •  25kV class switchgear in Virginia  •  34.5kV switchgear in Virginia  •  Switchboards and switchgear in Virginia  •  UL 891 switchboards in Virginia  •  UL 1558 switchgear in Virginia  •  Data center switchgear in Virginia  •  Switchgear supplier in Virginia  •  Switchgear distributor in Virginia  •  Switchgear cost and pricing in Virginia  •  Switchgear companies in Virginia  •  Switchgear lead times in Virginia  •  Switchgear warranty in Virginia  •  Switchgear engineering in Virginia  •  Switchgear assembly in Virginia  •  Busbar fabrication in Virginia  •  Control panel building in Virginia  •  Switchgear FAQ in Virginia  •  Request a switchgear quote in Virginia  •  Switchgear in Richmond, VA  •  Switchgear in Virginia Beach, VA  •  Switchgear in Norfolk, VA  •  Switchgear in Chesapeake, VA  •  Switchgear in Arlington, VA  •  Switchgear in Alexandria, VA  •  Switchgear in Hampton, VA  •  Switchgear in Newport News, VA  •  Switchgear in Roanoke, VA  •  Switchgear in Portsmouth, VA

Request a Quote Call (951) 403-5738